Nethawk_log 使用方法.pptVIP

* * * * * * * * * * * * * * * * * * * * * 28 Presentation TitleSlide Title | CONFIDENTIAL 2006 ABIS Log collection using Nethawk  Mandeep Singh * Contents This presentation is primarily divided into following sections: ABIS log collection using older NetHawk versions (called GSM Analyser) ABIS log collection using M5 NetHawk (versions 2.2 and above) * Section 1 ABIS log collection using older NetHawk versions (GSM Analyser) * Layer settings configuration  Go to Monitor ? Layer Details. Select PCU 16Kb/s from Stack Name Column. * Timeslots/channels configuration Following channels are to be configured: OM signaling channel TRX signaling channel (E)GPRS traffic channels EGPRS slave channels * OM signaling channel configuration Check the channel rate and PCM TSL with ZDSB command. NAME NUM SAPI TEI BR PCM-TSL-TSL C UNIT TERM FUNC UNIT TERM PCM-TSL ----- --- ---- --- -- ----------- - ---------------- ---------- ------- BF001 6 62 1 16 529-25-6 BCSU-2 14 0 4160H 3 388-00 MML Sub-Tsl Net-hawk SubCh 0 0 2 1 4 2 6 3 OM signaling channel configuration Configuration should be: Stack = Nokia OM Abis Rate = Bit rate (from ZDSB output) Timeslot = PCM TSL (from ZDSB output) SubCh = PCM sub TSL (from ZDSB output) Example in the previous slide OM-SIG channel is configured on SubCh 3 of Timeslot 25 having Bit Rate as 16kbps * TRX signaling channel configuration Check the channel rate and PCM TSL with ZDSB command. NAME NUM SAPI TEI BR PCM-TSL-TSL C UNIT TERM FUNC UNIT TERM PCM-TSL ----- --- ---- --- -- ----------- - ---------------- ---------- ------- T0013 7 0 3 32 529-30-4 BCSU-1 14 16 4161H 5 308-16 T0014 8 0 4 32 529-30-0 BCSU-3 14 0 415EH 3 404-00 T0015 9 0 5 32 529-29-4 BCSU-9 14 17 415AH 6 1044-17 * TRX signaling channel configuration Configuration should be: Stack = GSM Abis Rate = Bit rate (from ZDSB output)