毕业论文热力系统换热站生产工艺软件设计及仿真成.docVIP

摘 要 关键词RSView32 Abstract As human awareness of environmental protection, central heating cogeneration mode will gradually replace the small and medium sized boiler room. As the heat source plant and heat exchange station, a middle link between users, the quality of its heat to improve the quality of thermal heating network condition, plays an important role to improve the quality of heat This paper introduces the heat exchanger station institutions and principle, and analyzes the heat exchanger station system structure, programming ideas and heat exchanger station process flow. Based on the understanding and further RSView32 software, and its functions in heat exchanger station system and its application to carry on the design. System through the programmable controller (PLC) collect data, each parameter variable control in the ideal, within the scope of the use of its remote monitoring communications network. The design of the system can satisfy heat exchanger station automatic control and comfortable energy-saving, applicability, high in saving energy, improving economic efficiency to have the important meaning. Keywords：Thermal System; Heat Transfer Station; Production Process; Software Design; RSView32  目 录 摘 要 I Abstract II 第1章 绪论 1 1.1 集中供热的背景和国内外的发展趋势 1 1.2 换热站的现状和发展趋势 2 1.3 本次论文设计的意义 2 1.4 设计的要求 3 第2章 换热站结构及原理 4 2.1换热站的简介 4 2.1.1换热站的简介 4 2.1.2换热站的构成 4 2.1.3换热站与热用户的连接方式 4 2.2换热站的结构及原理 6 2.2.1换热站结构图及工作原理 6 2.2.2换热站运行的调节控制方式 7 2.2.3换热站的节能分析 11 2.3换热站各部分结构及用处 11 2.3.1换热器 12 2.3.2流量计 14 2.3.3循环水泵 17 2.3.4阀门 17 2.3.5温度计、压力计 18 2.3.6其它 18 本章小结 18 第3章 系统总体方案的设计 19 3.1总体的设计思路 19 3.2系统构成示意图 19 3.3系统的管理 21 本章小结 21 第4章 系统的软件设计 23 4.1 RSView32的简介 23 4.2组态软件RSView32的显示操作设计 23 4.2.1组态软件RSView32通信配置 23 4.2.2创建标记数据库 25 4.2.3创建图形显示 25 4.2.4配置数据记录、活动记录、事件等 26 4.2.5添加安全措施 27 本章小结 27 结 论 28 致 谢 29 参考文献 30 附录1 译文 31 附录2 英文参考资料 35  第1章 绪论 1.1 集中供热的背景和国内外的发展趋势 集中供热是在十九世纪末期，伴随经济的发展和科学技术的进步，在集中供热技术的基础上发展起来的，它利用热水或蒸汽为热媒，由集中的热源向一个城市或较大区域供应热能。集中供热不仅为城市提供稳定、可靠的热源，改善人民生活，而且与