S7-300精密滚柱直径筛选系统中的应用.docVIP

摘 要 现代制造技术的提高，对测量技术在测量精度与方法上提出了更高的要求，从而使精密测量在现代制造技术中得到了迅速的发展和普及，为机械制造中工件的互换性和产品质量提供了更好的保证。与常规测量一样，精密测量也是将被测量与标准量（或单位量）进行比较，并确定其比值的过程。这一量过程包括被测对象、计量单位、测量方法和测量误差等四个要素。其测量的内容包括长度、角度、几何形状、表面相互位置及表面粗糙度等参数。一般，以um作为测量单位由该系统能够对进行自动，有效的降低能耗，系统持在状态，提高生产。：可编程控制器（PLC）Modern manufacturing technology to improve measuring technique, measurement precision and methods in put forward higher request, so precise measurement in the modern manufacture technology obtained a rapid development and popularization,the workpiece for mechanical manufacturing the interchangeability and product quality provides a better guarantee. As with regular measurement precision measurement is also will be measured and standard amount (or unit volume), compared the process and determine their ratio. This volume process including tested object, measurement unit, measuring method and measurement error and so on four factors. Its measurement includes length, Angle, geometric shapes, surface mutual position and surface roughness and parameters.In general, um as measurement unit. Precision Roller automatic screening system composition with S7-300PLC, photoelectric icrometer, and phasesensors, inductive m-sensitive detector circuits，voltage amplifier circuit, electronic control valves as well as the main light and the composition of the electrical device control system，diameter roller to achieve precision control of the selection system。System bodies by measuring the analog voltage signal, and then through the AI module error signal into the PLC will be processed through the error analysis and comparison of results obtained signals which control the roller into which hopper。 The system is able to automatically filter precision roller and effective to reduce energy consumption, allowing the system to keep running fast precision, increasingproductivity。 ：PLC automated screening measurement 目 录 第1章 概 述 1 1.1 自动筛选系统产生的背景和意义 1 1.2 自动筛选系统的国内外研究现状 1 1.3 现代精密测量技术现状及发展 2 1.3.1 现代精密测量技术现状 2 1.3.2 现代精密测量技术发展 2 1