Functional Specification for 15 kV, 25 kV, or 35 kV Underground精选.pdf

Distribution/Substation Transformer Functional Specification Guide Type VFI, Vacuum Fault Interrupter Transformer Option G210-12-VFI Functional Specification for 15 kV, 25 kV, or 35 kV Vacuum Fault Interrupter Distribution/Substation Transformer Option 1. Scope 1.1. This specification is intended to be a supplement to the G210-12-1 Distribution Transformer specification guide when VFI protection is required. 1.2. This specification applies to [select: three-phase; single-phase], 50-60 Hz, fully dead front, [select: pad- mounted distribution; substation] transformers. Overcurrent protection shall be accomplished utilizing a resettable vacuum fault interrupter (VFI) which shall be provided with [select: three-phase or single-phase], [select: three-pole ganged or single-phase] operation. [select: The unit shall have provisions for a motor operator to be added; the unit shall have a motor operator; or the unit shall be manually operated]. 1.3. The VFI unit is to be used for [select: loop protection; transformer protection]. 1.4. The unit is to be insulated with FR3 less-flammable dielectric fluid. The unit shall utilize vacuum interrupters for all fault current interruption such that the dielectric media is not consumed or contaminated by normal operations of the interrupters. The unit shall be designed for installation on a concrete or fiberglass pad at ground level. 1.5. The transformer shall use resettable interrupter controls and shall not use fuses. 1.6. This specification shall only cover the purchase and shipment of transformers. The purchaser and/or user shall be responsible for all site-work, electrical connections, and installation. 2. Applicable Standards