DCS与变频器、ADAM4000的接口方案.docVIP

DCS与变频器、ADAM4000系列、阀检仪的接口方案 （Valve.dll的接口说明） 说明 Valve.dll内部包含几个部分的采集功能，可以同时使用，说明如下： 工程引用中添加（Valve.dll，需要注册），并在模块（mdlMain.bas）中添加变量声明 Public RW_Tran As New RW_Tran Public Read_Valve As New Read_Valve Public Read_Write4K As New Read_Write4K 变频器接口说明 RW_Tran .ini(ByVal ComNum As Long, ByVal iniStr As String, ByVal ini_Path As String, ByVal Num As Long) As Boolean 功能：初始化变频器接口 参数：ComNum为串口号，iniStr为通讯参数，ini_Path为系统路径，Num为变频器型号选择（1为FuJiG11） 返回：True或是False RW_Tran .R_Current(ByVal ID As Long, ByRef Current As Long) 功能：读变频器输出电流 参数：ID为变频器地址，Current为变频器输出电流 返回：Current RW_Tran .R_Speed(ByVal ID As Long, ByRef Speed As Long) 功能：读变频器转速 参数：ID为变频器地址，Speed为变频器转速 返回：Speed RW_Tran .W_Speed(ByVal ID As Long, ByVal Speed As Long) 功能：设置变频器转速 参数：ID为变频器地址，Speed为变频器转速 返回：无 RW_Tran .W_Frequency(ByVal ID As Long, ByVal Frequency As Single) 功能：设置变频器频率 参数：ID为变频器地址，Frequency为变频器频率 返回：无 RW_Tran .Exitdll 功能：退出变频器采集 参数：无 返回：无 2．ADAM4000系列接口说明 Read_Write4K.ini(ByVal ComNum As Long, ByVal iniStr As String, ByVal ini_Path As String) As Boolean 功能：初始化ADAM4000接口 参数：ComNum为串口号，iniStr为通讯参数，ini_Path为系统路径 返回：True或是False Read_Write4K.readValue24(ByVal Add As Long, ByRef rValue() As Single) 功能：读取ADAM4024的数据 参数：Add为4024的地址，rValue()为通道返回值 返回：rValue() Read_Write4K.readValue17(ByVal Add As Long, ByRef rValue() As Single) 功能：读取ADAM4017的数据 参数：Add为4017的地址，rValue()为通道返回值 返回：rValue() Read_Write4K.readValue15(ByVal Add As Long, ByRef rValue() As Single) 功能：读取ADAM4015的数据 参数：Add为4015的地址，rValue()为通道返回值 返回：rValue() Read_Write4K.writeValue24(ByVal Add As Long, ByVal Channel As Long, ByVal Num As Long, ByVal wValue As Single) 功能：设置ADAM4024的数据 参数：Add为4024的地址，Channel为通道号，Num为量程范围选择，wValue为设定值 返回：无 Read_Write4K.Exitdll 功能：退出ADAM4000采集 参数：无 返回：无 3．读取阀检仪接口说明 Read_Valve.ini(ByVal ini_Path As String) As Boolean 功能：初始化阀检仪接口 参数： ini_Path为系统路径 返回：True或是False Read_Valve.readSigleValue(ByVal IP As Long, ByVal Channle As Long, ByRef value As Long) 功能：读取阀检仪单通道值 参数：IP为阀检仪序号，Channle为通道号，value为返回通道值 返回：value Read_Valve.readMultiValue(ByVal