两接触粗糙表面的弹塑性模型精选.pdfVIP

Journal of Modern Agriculture January 2013, Volume 2, Issue 1, PP.13-20 An Elastic-Plastic Model for Two Contact Rough Surfaces Hongliang Tian#, Dalin Zhu, Hongling Qin College of Mechanical and Material Engineering, China Three Gorges University, Yichang, China 443002 # Email:th Abstract The individual asperity spherical platform volume is conserved and its shape is not distorted during plastic deformation. A plastic universal solution was derived based on spherical platform volume conservation when two asperities plastically contact. GW dry contact elastic model and the surface microgeometry model of purely plastic contact are two limiting cases of the plastic general solution. The plastic ordinary solution depends not only the total interference but also on the interference history-critical elastic interference, which is in accordance with Levy-Mises equation. GW dry contact model underestimates the contact area. The plasticity index was given here that distinguishes from that of GW dry contact elastic model. Key words: GW Dry Contact Model; Levy-Mises Equation; Interference History; Spherical Platform Volume Conservation Model * 两接触粗糙表面的弹塑性模型 田红亮，朱大林，秦红玲 三峡大学机械与材料学院，湖北 宜昌 443002 摘 要：在塑性变形过程中，单峰的球台体积不改变，球台形状不改变。根据两单峰塑性接触时球台体积守恒推导了塑 性通解。GW 干接触弹性模型、完全塑性接触表面微几何模型是塑性通解的两种极限情况。塑性通解不仅与总干涉量有关， 而且与干涉量历史—— 临界弹性干涉量有关，这符合莱维-米泽斯方程。GW 干接触模型低估了接触面积。给出了与 GW 干接触弹性模型不相同的塑性指数表达式。 关键词：GW 干接触模型；莱维-米泽斯方程；干涉量历史；球台体积守恒模型 引言 经典机械结合面方法使用弹簧阻尼模型，该模型可直观地仿真结合面两侧零件的相对运动，但弹簧阻尼模型具有一个缺陷： 弹簧阻尼的理论计算数据与试验结果相差较大。 为解决弹簧阻尼模型的缺陷，进一步提高整机的建模精度与节约试验成本，Tia