电梯升降机的PLC 电气控制.docVIP

河南机电高等专科学校 毕业设计论文 论文题目：电梯升降机的PLC 电气控制?  系 部： 电气工程系 专 业： 电机与电器 班 级：2009级01班 学生姓名： 学 号： 指导教师： xxxx年 月 日 指导教师 职　称 教研室 学生姓名 班　级 毕业设计任务书 设计题目：电梯升降机的PLC 电气控制?确定系统实施方案建立 PLC为核心的控制系统，系统稳定可靠系统电源3∽380V/50Hz要求实现无级平滑升降具有报警及故障处理功能?目前电梯控制系统主要有三种控制方式：继电控制系统(早期安装的电梯多继电器控制系统)、PLC控制系统、微机控制系统。由于PLC具有性能稳定、抗干扰能力强、设计配置灵活等特点。自80年代后期PLC引入我国电梯行业以来，由PLC组成的电梯控制系统被许多电梯制造厂家普遍采用。在传统继电器系统的改造工程中，PLC系统一直是主流控制系统。为了改善电梯的舒适感和运行的可靠性，现在都改为用PLC来控制电梯的运行，这样大大提高了电梯的性能。就是详细介绍PLC的特点及整个设计过程。Along with the rapid development of our country’s economy，automatic control technology also get the rapid development,and the lift, as the modern high-rise building of vertical transport,is already widely, closely related with peoples life in industrial, commercial and civil application. This paper use Siemens S7-200 PLC to write a four elevator control system. Mainly analysising and describing the elevator control and operation.At present, The elevator control system is mainly have three control ways: relay control system (early installed elevator more relay control system), PLC control system, computer control system. Because of PLC having stable performance, strong anti-interference, design flexible configuration Characteristics. Since the 80 s PLC introduced into China’s elevator industry, PLC elevator control system is universal used by many elevator manufacturers. In traditional relay system transformation project, PLC system always is the mainstream control system. In order to improve the intimacy and the operation reliability of the elevator, now use PLC to control the operation of the elevator, so greatly improving the performance of the lift. This paper introduces the characteristics of the PLC and throughout the design process detailed. Keywords: control system, elevator, Siemens 目 录 毕业设计任务书………………………………………………………………………………I 摘 要 ……………………………………………………………………………………II 绪论……………………………………………………………………………………………1 第1章概述 2 1.1可编程控制器(PLC)的产生及定义 2 1.2 PLC的分类及特点 3 1.3 P