科技论文的投稿过程PPT.ppt

材料科学与加工专业英语;;;;;Types of contribution include:? papers reporting research and practice, typically 3500 words in length plus figures and tables? short communications, providing a?rapid publication route for preliminary announcements of the results of current work, or short accounts of new techniques, typically 1000-1500 words in length with, at most, four figures and/or tables ;critical assessments/reviews/overviews: should deal with their subject in a broad perspective, examining the current position critically and comprehensively: typically 4000-5000 words plus figures and tables, and well referenced. ;2. Conditions of submissionBy submitting to?Materials Science Technology, authors acknowledge and accept that papers are considered for publication on the basis: 1. that the paper presents original work that is not being considered or reviewed by any other publication, and has not been published elsewhere in the same or a similar form ;3. CopyrightAuthors will be required, before publication, to transfer copyright of their article to the Institute of Materials, Minerals and Mining (this condition may be waived if Crown (or equivalent) copyright is involved and a licence to publish given). Authors are responsible for obtaining permission to reproduce any material or illustrations for which they do not hold the copyright.?Under Maneys standard agreement, authors reserve:1. all proprietary rights other than copyright, such as patent rights;2. the rights to use all or part of the article in future works of their own.;4. Submission procedure and file requirementsArticles must be submitted online at?.? If you have not already done so, you will need to register to obtain a username and password. (Select the REGISTER option from the main navigation bar at the top of the homepage.)? Information on the submission procedure is provided online, but you will be asked to provide the information and files listed below.? Failure to conform to these requirements may delay t