曲轴箱的加工工艺流程及夹具设计.docVIP

曲轴箱的加工工艺流程及夹具设计 摘 要：本设计主要采用CAD/CAM技术对产品进行设计。说明书共分为两大块，分别是产品的设计与制造。前段部分着重阐述了产品的设计方案，后半部分介绍了产品的制造工艺。设计初期，首先使用游标卡尺对零件的外形进行了测绘，并根据测绘结果使用PROE软件对零件进行产品的三维造型。和传统的设计方法相比较，采用计算机辅助模具设计大大缩短了开发周期和生产成本。 The processing procedures and fixture design Abstract:According to desings the project description the request,The design specifications for the design of the design, including the main contents of a two-dimensional and three-dimensional one, the process of modeling process of designing and test fixture design specific It primarily includes modeling fixture design and two aspects, and fixture design is primarily in the process of parts, and processing procedures of cards based on design, various options are correct, the process and the processing quantity.In addition,in order to enhance the labor productivity,reduces the labor intensity,guaranteed the processing quality,must design the unit clamp. This design mainly uses the CAD/CAM technology to carry on the design to the product.The instruction booklet altogether divides into two bulks, respectively is the product design and the manufacture.The first section part elaborated emphatically the product design proposal, the second half of introduced the product manufacture craft.The design initial period, first used Vernier caliper to carry on the mapping for the components contour, and used the PROE software according to the mapping result to carry on the product for the components the three dimensional modelling. Compared with the traditional design method, uses the computer assistance mold design to reduce greatly the development cycle and the production cost. keyword:jig,crankcase, 目 录 序言 ………………………………………………………………………1 第1章 零件的分析………………………………………………………2 1.1零件的工艺分析 …………………………………………………………2 第2章 工艺规程设计……………………………………………………2 2.1确定毛坯的制造形式 ……………………………………………………2 2.2基面的选择………………………………………………………………2 2.3制定工艺路线……………………………………………………………3 2.4机械加工余量、工序尺寸及毛坯尺寸的确定 ……………………………6 2.4.1毛坯余量及尺寸的确定 ………………………………………………6 2.4.2各加工表面的机械加工余量，工序尺寸及毛坏尺寸的