GPON OLT(MA5600T)配置流程图.doc

1．Configuration flowchart for GPON service 2．Configuration flowchart for Triple-play service （1）Internet service （2）IPTV service （3）SIP service （4）POTS service 3．Configuration flowchart for TDM E1 service 4．Configuration flowchart for IP VPN service Add the upstream port 5600(config)#port vlan 100 0/19 0-1 Add an ONT 5600(config-if-gpon-0/2)#ont add 1 0 2011- sn-auth profile-id 2 Create a vlan 5600(config)#vlan 100 smart VLAN Start Add a GEM Port 5600(config-if-gpon-0/2)#gemport add 1 gemport-id 150 eth 5600(config-if-gpon-0/2)#ont gemport bind 1 0 150 1 car 2500 2500 5600(config-if-gpon-0/2)#ont gemport mapping 1 0 150 vlan 10 Bind the T-CONT profile 5600(config-if-gpon-0/2)#tcont bind-profile 1 0 1 profile-id 10 Add the service port 5600(config)# service-port vlan 100 gpon 0/2/1 gemport 150 multi-service user-vlan 10 rx-cttr 128 tx-cttr 128 Save the data 5600(config)#save End Is there a right CAR profile? Configure a CAR profile 5600(config)#traffic table ip car 2048 priority 0 priority-policy tag-In-Package Is there a right T-CONT profile? Configure a T-CONT profile 5600(config)# tcont-profile add type1 fix 2500 No Yes Yes No Is there a right alarm profile? Configure an alarm profile 5600(config)#gpon alarm-profile add No Yes Bind the alarm profile 5600(config-if-gpon-0/2)#ont alarm-profile 1 0 profile-id 2 Start Add the upstream port 5600(config)# port vlan 1284 0/19 0-1 5600(config)#link-aggregation 0/19 0,1 egress-ingress Add a GEM Port 5600(config-if-gpon-0/2)#gemport add 1 gemport-id 150 eth 5600(config-if-gpon-0/2)#ont gemport bind 1 0 150 1 car 2500 2500 5600(config-if-gpon-0/2)#ont gemport mapping 1 0 150 vlan 11 Bind the T-CONT profile 5600(config-if-gpon-0/2)#tcont bind-profile 1 0 1 profile-id 6 Add an ONT 5600(config-if-gpon-0/2)#ont add 1 0 2011- sn-auth profile-id 2 Create a VLAN MA5600(config)#vlan 1284 smart End Configure ONT 5600(config-if-gpon-0/2)#ont port vlan 1 0 fe ont-port 1 11 5600(config-if-gpon-0/2)#ont native-vlan 1 0 fe