Safety Policy and Procedure英文资料.pdfVIP

Safety Policy and Procedure Policy Number: 054 Authorized By: The Cianbro Companies Alan Burton Title: Airless Spraying Operations Program Effective Date: 03/02/10 Page 1 of 9 1 Status 1.1 Update of existing policy effective 06/03/11. 2 Purpose 2.1 To provide guidelines for the safe operation of airless spraying equipment and to identify and eliminate the hazards associated with these tasks. 3 Applicability 3.1 This policy applies to all subsidiary companies and departments of The Cianbro Companies. 3.2 All organizations are required to comply with the provisions of this policy and procedure. Any deviation, unless spelled out specifically in the policy, requires the permission of the Corporate Safety Officer or designee. 4 Definitions 4.1 Airless Spraying: An airless sprayer uses air or an electrically run hydraulic pump to move paint from a bucket or container, through a tube, into a high-pressure hose, to a spray gun and finally to the surface. An airless sprayer is made from several components which are: • Pump / Fluid Section This is what moves and pressurizes the material to be sprayed. Airless pumps are made of hardened, heavy-duty steel so they can create the high pressure needed to atomize paints. • Motor Drive Train Cianbro uses both air and electric powered pumps. • Gun, Hose Tip The hose, gun spray tip get the pressurized liquid onto the surface. • Pressure Control