B8 Suspension, Touring英文资料.pdfVIP

B8 Suspension, Touring Touring Suspension Kit Application Guide Qty Description Part Number A5/S5 Performance Spring Kit SP04.0004.00 A4/S4 Performance Spring Kit SP04.0005.00 Special Tools Required Qty Description Part Number 1 Torque Wrench VAG 1331 1 Torque Wrench VAG 1332 1 Engine/transmission jack VAG 1383 A 1 Spring Compressor VAG 1752/1 1 Spring holder VAG 1752/7 1 Rear Spring Compressor VAS 6274 1 Supplementary Set VAS 6274/10 1 Hollow Piston Cylinder VAS 6179 1 Spreader 3424 1 Tensioning strap T10038 Please read ALL instructions prior to attempting installation. Please torque all fasteners to specifications. Front Removal and Install 1 Before removing any parts, park the car on a secure, stable, and level surface. Remove wheel trim; pull trim cap off light-alloy wheels (using puller in vehicle tool kit) and loosen (but do not remove) the wheel lug nuts. Jack the vehicle up, and place the car on four stable jack stands or use a professional vehicle lift. We recommend having two people available for certain steps of the installation. 2 Remove wheels 3 Before removing left suspension strut, remove headlight range control link from track control link. 4 Remove the fastener and plastic nut on the inside of the fender lip. This is to provide additional clearance for the tires. The clip will not be reinstalled. 5 Remove pinch bolt for upper control arms. Remove both joint pins in uppe