关于单片机毕业设计--英文翻译.docVIP

英文翻译 Single-chip components To auto-complete single-chip basis, it should be the most important part of what it? Calculated as an example we calculate on an abacus math problems together. Cases: 36 +163 × 156-166 ÷ 34. Now to carry out operations, first of all need a plan, followed by Pen and paper. We have to calculate the issue of record, and then count the first step, 163 ?:156, add it with the results of 36 recorded in the paper, and then calculate 166 ÷ 34, then it results from a minus, it has been the final outcome. Now, we use single-chip to complete the process, it is clear that it should be instead of thinking first of all the components for computing, which is the calculator; Secondly, there must be able to play the role of devices, which can remember the original subject, the raw data and intermediate results, but also remember to enable single-chip operation can be automatically prepared by the various orders. These devices called memory. In addition, the need to replace the role of the controller, it will be in accordance with an order prior to issuing various control signals so that the whole process can be calculated step by step manner. However, this three-part light enough, the original data and commands to be input, the results of the calculation to the output, are required by the order in which they sometimes need to wait. The first step: the first number from its storage unit (Location) in the check out to the computing device. Step two: the second number from its storage unit in the check out to the computing device; the third step: add; fourth step: End the sum of the results to the specified memory unit. All of these take a number, send a few, the sum of deposit, etc. are a few operations (Operation), we asked the computer to operate with the implementation of the various forms of writing down the order, which is instruction. But how can we identify them and to perform these operations? This is a single chip in the design by the designers