用挤光工艺代替精车或精磨经济地加工轴套细长通孔.docVIP

用挤光工艺代替精车或精磨经济地加工轴套细长通孔 林燕华 （萍乡市德博科技发展有限公司，江西萍乡 337000） 摘要：通过多种加工方法的比较和实施效果对比，总结出用挤光的方法能高效地加工出工件硬度不高的较细较长的光滑内孔、经济收益最高，得出了一些实用的工艺参数。 关键词：挤光；小孔；高效；经济收益；工艺参数 Squeezed-burnishing instead of finishing or grinding processing sleeve slender hole economy Lin Yanhua (Pingxiang Debo Technology Development Co., Ltd.,Pingxiang 337000, Jiangxi) Abstract : through a variety of processing methods and the effect of contrast, summed up with squeezed-burnishing method can efficiently processing a low-hardness workpiece thin and long smooth bore、the economic profit is maximum, draw some practical process paramet