电信网通双通道案例.docVIP

电信网通双出口负载分担配置宝典!!!!!! 负载分担配置指导? ?? ???定义监测组，分别监测电信和网通网关：进入系统视图，创建detect-group 1，监测电信网关：QuidwaysystemSystem View: return to User View with Ctrl+Z.[Quidway] detect-group 1[Quidway-detect-group-1] [Quidway-detect-group-1]detect-list 1 ip address 13[Quidway-detect-group-1]quit? ?? ?创建detect-group 1，监测网通网关：[Quidway]detect-group 2[Quidway-detect-group-2]detect-list 1 ip address 9[Quidway-detect-group-2]quit[Quidway]? ?? ?? ?? ?? ???注：以上以地址13最为电信网关地址，地址9为网通网关地址为例，可以根据实际组网情况修改。2.2? ?? ???配置两条默认路由互为备份，优先走电信线路：[Quidway]ip route-static 13 preference 60 detect-group 1[Quidway]ip route-