NA3 - cn [兼容模式].pdfVIP

NA3 NA4 The NA-3 and NA-4 are fully automatic wire feed control units. The NA-3 can be used with either a constant current or a constant voltage DC power source. It is set in constant current from the factory. When changing over to constant voltage the front name plate along with the optional start/crater nameplates must be changed to avoid control problems. NA-3 NA-4是完全自动送丝控制机构。NA-3可以用在恒流和恒压直流电源上.工厂提供不间断电流。 若将其转变成恒压模式操作时时，前面板上的起弧/收弧选项必须做相应改变，以避免在操做过程中出现故障。 The NA-4 can only be used with a constant current power source. NA-4必须用在恒流的交流电源上。