英国EETS公司.docVIP

切割机 Cell Cutter 210 AutoCut Technical Specifications: Maximum Solar Cell Dimension:? 210 x 210mm (8 x 8 inch) Cutting Block: ? Adjustable cutting guides for each size of cell, 100, 125, 150, 156, 210 mm square. Cutter:? Air motor ??25000 rpm at 140psi (15 cfm)Diamond blade ?100mm diameter, 0.4mm thickness (15000 cuts before replacement) Cut Cell Sizes: ? Down to 10mm strips. Mode of Operation: Switching ????? Automatic Feed? - operator initiatedCell holding ??Suction vacuum pressure operated by two?switches to incorporate different cell sizes. Equipment Dimensions:? 75cm (Width) x 96cm (Length) x 40cm (Height) Equipment Weight:?? 20kg (approx) Utilities Requirements:? Compressed air ?9 - 10 bar at 15cfm ? Accessories Options: Fume Dust Extractor Fan is not included, but equipment comes with a 5cm outer diameter pipe that can fit to any standard commercial dust extractor. Can be supplied as a manual cut version without the pneumatic feed. An automatic?pick and place cell loading and unloading option is available. Note: EETS reserves the right to change specification without notice （二）测试仪 1. Array Tester 570 ? Specifications: ? Current:-50? AmpsAccuracy?1.5% at 25 deg. C. ? Voltage:-600 VoltsAccuracy?1.5% at 25 deg. C. Note: other ranges available to order ? Irradiance:-Reference calibrated crystalline cell Array Temperature:-K type thermocouple probe Data Acquisition System: ??16 bit resolution??Software triggered operation ??Laptop connected via USB ??Dedicated software supplied  ? Operation: The software prompts the operator to input user information regarding the site, type of array, name and any reference number and date. The system acquires the I-V curve data and then the data is displayed and stored on the laptop PC for future processing. The tester measures the following I/V characteristics of PV arrays:??Short circuit current (Isc) ??Open circuit voltage (Voc) ??Current at max. power (Impp) ??Voltage at max. power (Vmpp)? ??Power at m