YQP36预加水盘式成球机设计—毕业设计(论文).doc

YQP36预加水盘式成球机设计 摘 要：为了满足现代机立窑水泥生产过程中预加水成球的技术要求，发展第六代预加水盘式成球机，从而保证料球的高高产量，提高水泥的煅烧质量和产量本课题设计YQP36预加水盘式成球机最新的技术要求对 YQP36预加水盘式成球机的构传动和刮刀系统改进首先方案论证然后根据分析的结果计算轴向力、扭矩以及功率校核强度从而选择及其他相关部件。根据已的部件参数分析拟定传动装置的运动简图，分配各级传动比，传动零件的结构对 YQP36预加水盘式成球机的润滑和密封方式加以最后预加水盘式成球机总体结构设计。此次设计本着高产量、高质量成球，稳定运转的原则，实现预加水盘式成球的节能、经济、环保、可扩展 成球预加水刮刀料球The Design of YQP36 Disc Prewatering Pelletizer Abstract: In order to satisfy the technical requirement of prewatering pelletizing in the process of cement production with modern kiln and develop the sixth generation of prewatering pelletizer, the topic which is designed is YQP36 Disc Prewatering Pelletizer. Consequently the proportion of diameters, the high strength, the high holes rate and the high output of raw meal pellets could be assured of. According to the new requirements, the structure, the transmission system and the drawknife system of YQP36 Disc Prewatering Pelletizer are improved and designed. This design has been completed by the method which combines theories design with experience design. The transmission system and drawknife system are optimized basing on that the strengths of chassis and support are assured with analogy design. Firstly, the projects of designation and improvement of prewatering pelletizer are demonstrated, including the structure, the ways of delivering the motivation and drawknife system by referring some improvement experience from production practice; Secondly, based on the analytical results, axial force, the torque and power are computed so that the electromotor, decelerator and other corresponding components could be determined; Thirdly, according to the parameters of the parts which has already been assured, the simple exercise diagram of the transmission device is analyzed and drawn up and the ratios of all levels are assigned. Then the structure design is carried on and the strength of part is followed to be checked. The ways of lubricant and seal of the equipment are determined in succession. Finally, the whole o