vtp+stp+三层交换综合实验.doc

vtp+stp+三层交换综合实验 【央邦】考试通过，才付培训费Cisco远程课堂足不出户 随即学习考证！ 做IT就要做精英,至少4000/月吧?【安博亚威】CCIE考试通过率第一！[OPENLAB]RHCE+架构师优惠2200元贺深圳北大青鸟信狮学校学员100%就业 51cto 佚名 2009-6-8 10:33:52 保存本文 推荐给好友 收藏本页 实验拓扑图: ??? 实验环境配置说明： ??? 1.将R1的Fa0/1接口的IP设为：10.0.0.2/8，Fa0/2接口的IP设为：20.0.0.1/8??? 2.将SW2的Fa0/10接口的IP设为：10.0.0.1/8 ??? 3.将vlan2的IP设为：192.168.1.1/24 ??? 4.将vlan3的IP设为：192.168.2.1/24 ??? 5.将pc1的IP设为：192.168.1.10/24 网关：192.168.1.1 ??? 6.将pc2的IP设为：192.168.2.10/24 网关：192.168.2.1 ??? 7.将pc3的IP设为：192.168.1.20/24 网关：192.168.1.1??? 8.将pc4的IP设为：192.168.2.20/24 网关：192.168.2.1 ??? 9.将pc5的IP设为：20.0.0.2/8????? 网关：20.0.0.1??? 实验结果要求： ??? pc5能ping通pc1,pc2,pc3,pc4. ??? ==========================SW1配置================================= ??? SW1(config)#interface range f0/1 -2 ??? SW1(config-if-range)#switchport mode trunk ??? SW1(config)#interface range f0/13 -14 ??? SW1(config-if-range)#switchport mode trunk ??? SW1(config)#vtp domain leaf???????????????????????????????????? //创建VTP域名 ??? SW1#vlan database ??? SW1(vlan)#vlan 2 ??? VLAN 2 added: ??????? Name: VLAN0002??? SW1(vlan)#vlan 3 ??? VLAN 3 added: ??????? Name: VLAN0003 ??? SW1(vlan)#exit ??? SW1(config)#spanning-tree vlan 2 root primary???????????? //设置SW1为vlan2的主根网桥 ???? VLAN 2 bridge priority set to 8192 ???? VLAN 2 bridge max aging time unchanged at 20 ???? VLAN 2 bridge hello time unchanged at 2???? VLAN 2 bridge forward delay unchanged at 15 ??? SW1(config)#spanning-tree vlan 3 root secondary?? //设置SW1为vlan3的辅助根网桥 ???? VLAN 3 bridge priority set to 16384 ???? VLAN 3 bridge max aging time unchanged at 20 ???? VLAN 3 bridge hello time unchanged at 2 ???? VLAN 3 bridge forward delay unchanged at 15 ??? SW1(config)#interface range f0/1 -2???????????????????????? //配置以太网通道 ??? SW1(config-if-range)#shutdown ??? SW1(config-if-range)#channel-group 1 mode on ??? SW1(config-if-range)#no shutdown ??? SW1(config)#ip routing?????????????????????????????????????????? //开启三层交换路由功能 ??? =============================SW2配置==========================?