[计算机软件及应用]VMware_linux_install-11g最经典.docVIP

在VMware上安装linux X Window System GNOME Desktop Environment Editors Text-based Internet Server configuration Tools Web Server Windows File Server FTP Server Development Tools Administration Tools System Tools 安装开始 重启后配置 安装完成 增加磁盘和网卡： 点击finish即可。 增加网卡信息 配置linux: 配置IP地址： 添加另一个网卡 修改主机名： [root@localhost ~]# cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=11grac1 修改/etc/hosts [root@localhost ~]# more /etc/hosts # Do not remove the following line, or various programs # that require network functionality will fail. localhost.localdomain localhost # public network 00 11grac1 01 11grac2 # private network 00 11grac1_prv 01 11grac2_prv # virtual ip 00 11grac1_vip 192.l68.1.201 11grac2_vip 检查安装的RPM包： rpm -q binutils compat-db control-center gcc gcc-c++ glibc glibc-common gnome-libs \ libstdc++ libstdc++-devel make pdksh xscreensaver libaio libaio-devel elfutils-libelf-devel sysstat unixODBC-devel libaio-devel-0.3.105(盘3) elfutils-libelf-devel-0.97(盘4) sysstat-5.0.5(盘4) unixODBC-devel-2.2.11(盘4) 为后增加的磁盘分区： [root@localhost ~]# fdisk /dev/sdb The number of cylinders for this disk is set to 1044. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-1044, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-1044, default 1044): +5400M Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 2 First cylinder (659-1044, default 659): Using default value 659 Last cylinder or +size or +sizeM or +sizeK (659-1044, default 1044): Using default value 1044 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition tabl