超声水处理系统的规划设计和关键技术研究 （含外文翻译）.doc

本科毕业设计论文 课题名称 超声水处理系统的规划设计和关键技术研究 学生姓名 李 响 学号 专业名称 电子信息工程 指导教师姓名 朱昌平 申请学位级别 工学学士 学位授予单位 河海大学 论文提交日期 2010年6月 计算机与信息学院（常州）  本科毕业设计（论文）任务书 I、毕业设计（论文）题目： 超声水处理系统的规划设计与关键技术研究 [2].铃木雅臣晶体管电路设计科学出版社[3]. Mark I.Montrose，电磁兼容和印刷电路板理论、设计和布线，人民邮电出版社出版社 [4].郭建中，林书玉，郭勇亮，压电换能器匹配电路的优化 [5].邱小平Windows CE6开发经典电子工业出版社摘 要 【关键词】 电磁兼容性 嵌入式操作系统 ABSTRACT The subject is supported by National Natural Science Foundation of China, Ultrasonic reactor for water treatment, mechanism of parameter optimization (Approved ID: ) and Ultrasonic reactor for water treatment and mechanism of parameter optimization (Approved ID: ). With the worldwide water pollution becoming more and more serious, as a potential new technology, the technology of water treatment by ultrasonic aroused extensive attention because of its no secondary pollution. The paper which used ultrasonic treatment as the core technology, has planed and designed the ultrasonic water treatment system, some research of which are based on author’s and others previous work. The system has been divided into some sub-projects in accordance with different technology fields. Ultrasonic power source has been designed and can output the most output power of 100W and adjustable, the frequency 200~500 kHz, the frequency can adjust step at about 1% of the working frequency. Through comparing different theory analysis and experiments, class D power amplifier which made up of the signal circuit generated by CPLD and half-bridge driver IC is finally confirmed. The easy feasible tuning matching circuit has been designed to improve piezoelectric transducer efficiency. The author learns the embedded system which few members of team set foot in it. By various scheme demonstrated, Windows CE has been transplanted successfully as the core control part of the platform issue. Th