基于单片机控制的饮水机加热系统设计毕业论文精品.docxVIP

摘要随着计算机在社会领域的渗透, 单片机的应用正在不断地深入，同时带动传统控制检测日新月益更新。在实时检测和自动控制的单片机应用系统中，单片机往往是作为一个核心部件来使用，仅单片机方面知识是不够的，还应根据具体硬件结构，以及具体应用对象特点的软件结合，以作完善。本文介绍了单片机应用于电加热饮水机的一种设计方法，该电加热饮水机具有自动化程度高、安全性好、功能多、使用方便、功率小、加热快、可靠性高等特点。它以单片机AT80C51为核心，通过3个数码管显示温度和4个按键实现人机对话，使用单总线温度转换芯片DS18B20实时采集温度并通过数码管显示，并提供各种运行指示灯用来指示系统现在所处状态，如：温度设置、加热、停止加热等，整个系统通过四个按键来设置加热温度和控制运行模式。并详细地论述了以单K机为处理器的电加热饮水机的硬件、软件设计、系统编程和抗干扰设计等方面的问题。本系统以ATMEL公司的AT80C51单片机为核心，由DS18B20、信号处理电路、键盘控制电路、LED显示电路、输出控制电路等构成。关键词：温度转换；LED显示电路；单片机 ；键盘控制电路 ABSTRACTAlong with the computer in the social sector penetration and MCU application is continuously thorough, and push the traditional control test on the new beneficial update. In real time detection and automatic control of the microcomputer application system, the MCU is often as a core component to use, only MCU aspects knowledge is not enough, should according to the specific hardware structure , and the specific application of the characteristics of the object software combination to be perfect. This paper introduced a single-chip microcomputer which used in electric heating water dispenser as a design method, the electric heating water dispenser with a high degree of automation, security and multi-functional easy to use，small power，heating quickly, and high reliability. AT80C51 microcontroller as the core of it, through the three temperature digital display and 4 keys to achieve man-machine dialogue, the use of single-chip bus temperature conversion temperature DS18B20 real-time acquisition and through the digital display and offers a variety of operating light to indicate system now live in the state, such as: temperature setting, heating, and stop heating, the entire system through the four buttons to settheheatingtemperature and control the operating mode .The paper described in detail by the single-chip processor power for heating water dispenser hardware，software design, system design, programming and anti-jamming problems. The controller ATMEL Corporation AT80C51 single-chip micr