[信息与通信]TD-SCDMA Principle_C -李世鹤.pptVIP

Contents Part C: Physical layer of TD-SCDMA Review Basic technologies in Physical layer Frame Structure Power and synchronization control Cell search Handover Continue Importance of Physical layer The most active technologies in wireless communication: RTT Radio Transmission Technology is composed of 3 layer. In RTT, the basic technology is in Physical layer Most of market, revenue of mobile equipments, is related to PL (hardware) The main competition in standard is in RTT Base band data processing in CDMA system Contents in Physical layer Basic physical layer technologies Channel mapping Frame structure Multiplexing and de-multiplexing Channel coding and interleaving Modulation: QPSK Demodulation, including carrier recovery Digital combination Carrier frequency tracking Power control Specified PL technologies in TD-SCDMA Smart antenna Joint detection Baton handover Up-link synchronization Cell search and Random access Contents Part C: Physical layer of TD-SCDMA Review Basic technologies in Physical layer Frame Structure Power and synchronization control Cell search Handover Continue Multiplexing and data mapping Multiplexing: Service data +high layer signaling +physical layer control signal shall be combined into a common data sequence De-multiplexing: Opposite procedure of multiplexing Data mapping: With channel coding and interleaving, the data sequence shall be physical layer frame Data mapping principle: multiple code or variable SF. Multiple code: suitable for TD-SCDMA Variable SF: for FDD Channel coding Feature of Channel coding: Reduce required Eb/(N+I) Can reach lower BER Method of coding: Convolution coding with Viterbe decoding, R=1/2 or 1/3 Turbo coding Problem to be solved: Turbo coding with R=1/2 Channel coding or ARQ Interleaving Spreading and Modulation Spreading code: Walsh code Walsh code: a complete orthogonal series Spreading gain=spreading factor (SF) Based on information theory use bandwidth to higher sensitivity