基于的8051F350的AD转换显示存储程序.docx

#include C8051F350.h #include stdio.h#include math.h//-----------------------------------------------------------------------------// 16-bit SFR Definitions for F35x//-----------------------------------------------------------------------------/*需求：1、AD转换，24位精度：AIN0.0 2、四个按键：K1=P1^4，K2=P1^5，K3=P1^6，K=P1^7 3、1602液晶屏显示AD值：LCD1602_RS=P0^6，LCD1602_EN=P0^7，DB4 = P1^0， DB0=DB5 = P1^1，DB6 = P1^2，DB7 = P1^3 4、存储（24C02）：SDA=P0^0，SCL=P0^1函数：1、void main(void) //主函数{ while(1) { //连续不间断地得到AD值 ADZ = （AD值）;}} 2、void KeyScan(void) { if(K1==0) { K1OK=1;}} 3、void T2_ISR(void) interrupt 5 { //定时器，定时扫描按键，当有按键按下时，显示ADZTF2H = 0; KeyScan(); if(K1OK==1) { K1OK=0; //LCD1602第一行显示字母“ADZ”，第二行显示数字ADZ，24C02存储此值}}*//*****1602高四位LCD1602_RS=P0^6，LCD1602_EN=P0^7，DB4 = P1^0， DB5 = P1^1，DB6 = P1^2，DB7 = P1^3 AD转换，24位精度：AIN0.0 ,Verf+接100K可调电阻测试,满量程2500mv四个按键：K1=P1^4，K2=P1^5，K3=P1^6，K=P1^7存储（24C02）：SDA=P0^0，SCL=P0^1 （和T2扫描按键有冲突，应该实时存储）*****//////////////Routinessfr16 ADC0DEC = 0x9A; // ADC0 Decimation Ratio Registersfr16 TMR3RL = 0x92; // Timer3 reload registerssfr16 TMR3 = 0x94; // Timer3 counter registerssfr16 TMR2RL = 0xCA; // Timer2 Reload Registersfr16 TMR2 = 0xCC; // Timer2 Registersbit SDA = P0^0; // SMBus on P0.0sbit SCL = P0^1; // and P0.1sbit K1=P1^4;//四个按键sbit K2=P1^5;sbit K3=P1^6;sbit K4=P1^7;//-----------------------------------------------------------------------------// Global CONSTANTS//-----------------------------------------------------------------------------//--------------------------------------------------------------------------------#define SYSCLK // SYSCLK frequency in Hz#define MDCLK 2457600 // Modulator clock in Hz (ideal i