切削刀具技术工业手册 cutting tool technology industrial handbook.doc

Cutting Tool Technology  Previous books for Springer Verlag by the author: Advanced Machining: (1989) CNC Machining Technology series: Book 1: Design, Development and CIM strategies Book 2: Cutting, Fluids and Workholding Technologies Book 3: Part Programming Techniques (1993) CNC Machining Technology: Library Edition (1993) Industrial Metrology: Surfaces and Roundness (2002)  Graham T. Smith Cutting Tool Technology Industrial Handbook 123  Graham T. Smith, MPhil (Brunel), PhD (Birmingham), CEng, FIMechE, FIEE Formerly Professor of Industrial Engineering Southampton Solent University Southampton U. K. ISBN 978-1-84800-204-3 e-ISBN 978-1-84800-205-0 DOI 10.1007/978-1-84800-205-0 British Library Cataloguing in Publication Data Smith, Graham T., 1947– Cutting tool technology: industrial handbook 1. Metal-cutting 2. Metal-cutting tools I. Title 671.35 ISBN-13: 9781848002043 Library of Congress Control Number: 2008930567 ? Springer-Verlag London Limited 2008 Apart from any fair dealing for the purposes of research or private study, or criticism or review, as permitted under the Copyright, Designs and Patents Act 1988, this publication may only be reproduced, stored or transmitted, in any form or by any means, with the prior permission in writing of the publishers, or in the case of reprographic reproduction in accordance with the terms of licences issued by the Copyright Licensing Agency. Enquiries concerning reproduc- tion outside those terms should be sent to the publishers. absence of a speci?c statement, that such names are exempt from the relevant laws and regula- tions and therefore free for general use. information contained in this book and cannot accept any legal responsibility or liability for any errors or omissions that may be made. Co