复合冲压模具论文.docVIP

摘 要 冲压复合模广泛应用于金属成形零件的生产。本文介绍了止动件冲孔、裁料复合模的设计，分析了止动件的冲压工艺和冲压工序的组成对载体和排样设计方案作了，分析了产品外形合理的接边工艺，确定了条料的送进与导料方式及定距结构形式，并对模具的主要部件设计作了详细地说明同时也包含了冲裁力计算，定距方法，冲裁间隙选择，压力中心计算的设计要点模具结构合理简单、制作容易使模具生产成本降低，提高经济效益were widely used in metal parts production. This paper introduces the stamping compound mould designing of the stop moving parts which includes punching and cutting material. And the technological process for stamping the part is analyzed and the layout designs are analyzed and designed, rational joint-edge process of products outline, decided the guiding of the bar stock and the form of the fixed distance , describes the key die parts in detail. At the same time, includes the main design point of stamping force calculation , fixed distance method, the selection of stamping clearance, compress force center an so on . This paper include calculation and design in detail for mainly working in mould parts. The mould structure is flexible and reliable and product quality can be guaranteed . Keywords: Stamping compound mould, Stamping process, Layout, Cutting force, Cutting clearance, Pressure center 目 录 1 绪论………………………………………………………………………………1 1.1 课题简介…………………………………………………………………...1 1.2 选题背景…………………………………………………………………...1 1.3 冲压的特点及应用………………………………………………………...2 1.4 冲压的基本工序及模具…………………………………………………...2 1.5 设计现状及发展趋势……………………………………………………...3 2 对零件的综合分析………………………………………………………………3 2.1 工艺分析及模具结构类型………………………………………………... 2.1.1 工艺分析………………………………………………………….. 2.1.2 复合模的特点及选用…………………………………………….. 2.2 排样方案…………………………………………………………………... 2.3 压力中心及冲压力的计算………………………………………………... 2.3.1 压力中心的计算………………………………………………….. 2.3.2 冲压力的计算…………………………………………………….. 2.3.3 压力机标称压力的确定………………………………………….. 2.4 凸凹模刃口尺寸的计算…………………………………………………... 2.4.1 刃口尺寸确定原则……………………………………………….. 2.4.2 冲孔凸凹模尺寸计算…………………………………………….. 2.4.3 落料凸凹模尺寸计算…………………………………………….. 2.5 凸凹模结构设计…………………………………………………………... 2.5.1 冲孔凸模的设计…………………………………………………..