组件安装规格书.docVIP

INSTALLATION MANUAL FOR CRYSTALLINE SILICON SOLAR PHOTOVOLTAIC MODULES ZHEJIANG SOPRAY SOLAR CO., LTD  INTRODUCTION Thank you for choosing Sopray solar Photovoltaic modules. Sopray Solar is one of the leaders in China’s solar energy sector and provides the highest quality crystalline silicon solar photovoltaic modules in a range of sizes designed to meet the requirements of the most demanding energy and power users worldwide. Please read this manual completely before installation or use of modules. This manual applies to all Sopray solar modules and contains important installation, maintenance and safety information. General Information The installation of solar modules requires a great degree of skill and should only be performed by qualified licensed professionals, including, without limitation, licensed contractors and electricians. WARNING The solar modules generate electricity when exposed to light. Array of many modules can cause lethal shock and burn hazards. Only authorized and trained personnel should have access to these modules. Cover the modules with an opaque material during installation to avoid shocks or burns. Do not touch live terminals with bare hands. Use insulated tools for electrical connections. Use appropriate methods to mount solar modules. Fall of modules from high place will cause death, injury or damage. The solar modules have a protective glass front. Broken solar module glass is an electrical safety hazard (electric shock and fire).These modules cannot be repaired and should be replaced immediately. The solar module has a pair of male and female waterproof connectors. For a series electrical connection, connect positive (+) connector of first solar module to negative (-) connector of the following module. Do not short the positive and the negative. Do not disconnect under loa