基于MSP430-自动增益控制论文.docVIP

目录 摘要 I Abstract II 引 言 1 1 方案论证 2 1.1 总体方案 2 2 系统设计 4 3 MSP430 概述 5 3.1 TI公司的MSP430介绍 5 3.2 MSP430F169 6 3.3 最小系统-复位电路 6 4 单元模块电路 8 4.1信号峰峰值检测电路 8 4.2 显示电路介绍 10 4.3模数转换电路 14 4.3.1模数转换器ADC12 14 4.3.2 ADC12相关寄存器介绍 16 4.4 数模转换电路 19 4.4.1数模转换器DAC12 19 4.4.2 数模转换DAC12寄存器 21 4.5 程控芯片VCA822简介 24 5 测试数据及测量结果分析 26 6 总结 28 致谢 28 参考文献 29 附件 29 In the modern electronic equipment, the most common circuit structure is amplifier. In the process of learning Electronic technology basic we know, amplifier internal structure that is the existence of the capacitance will affect the amplifiers gain when amplifier is in the high frequency state lead to the output signal amplitude variation, make the output signal amplitude value cannot meet the requirements when in high frequency.So this design can use to automatically adjust to the size of the amplifier output signal and amplitude remains the same, namely the automatic gain control amplifier design. This subject adopts digital control circuits to control the amplifier gain with the closed loop operation, using MSP430 for development platform and through making use of amplitude compensation technology ro solve the amplifier output amplitude changing owing to the input frequency’s variation.Finally it will realize the automatic adjustment gain, so as to achieve a stable input the amplitude of the design. Amplifier has its availability has certain frequency range due to the influence of the internal components of the amplifier so this design is that output signal of the original will be adjusted in the normal work of the amplifierAGC circuit consist of controllable gain circuits, analog-to-digital conversion, digital -to- analog conversion, peak monitoring circuit and display circuit five parts. This topic to be presented are the contents of the principle of automatic control gain, having a command of MSP430, as well as the circuit principle of the automatic gain circuit each part. In the end, in the system ADC and DAC circuit wi