基于PLC的包装机控制系统论文.docVIP

摘 要 包装是产品进入流通领域的必要条件，而实现包装的主要手段是使用包装机械。近年来，随着全球经济的快速发展，各国人民的生活水平不断提高，食品、建材等工业发展越来越快，各个行业对自动包装设备的需求越来越大。但是，我国包装行业起步较晚，与国外的包装行业存在着很大距离，包装设备结构简单，技术落后，因而造成生产效率低下，物料严重浪费，能源耗费大。 本此设计主要介绍了一种以PLC（可编程控制器）为控制核心的自动包装控制系统。在包装过程中，通过称重传感器测量物料重量信号并利用PLC的PID功能对进料门（电动阀）开度进行控制，控制原则是设定重量与过程变量的偏差越大则电动阀开度越大，反之偏差越小电动阀开度越小。这样一来就使得物料称重更加精确，大大地提高了物料的利用率，更重要的是提高了生产效率，也就为企业创造了更多的价值。 另外，本系统的自动化程度较高，节省了劳动力的投入，并且精度较高，可靠性良好，相信会有良好的发展前景。 关键词：PLC（可编程控制器）；PID；自动包装  ABSTRACT The packing is the essential condition that the product enters the current distribution realm, but realizes the packing principal means uses the packaging machinery. In recent years, along with global economics fast development, various countries peoples living standard enhanced unceasingly, industrial developments such as food,building materials industry are getting quicker and quicker, each profession is getting bigger and bigger to the automatic packaging equipments demand. But, our country start to be late in the profession of packing, and has the very great distance with the overseas packing profession, the equipment of packing to be simple, the technology is backward, thus causes the production efficiency to be low, the material wastes seriously, the energy consumes in a big way. This design mainly introduces an automatic packaging control system that take the PLC （programmable logic controller） as the core of control. During the packing process, to measure the material weight signal through the Weighing Sensor and use the PID of PLC to control the opening of gate （Electrically operated valve）， The control principle is the set point and the process variable deviation is bigger, then the opening of Electrically operated valve is bigger, Otherwise the deviation smaller Electrically operated valves opening is smaller. Thus the material weighing is more precise, on the other hand, it will raise the utility rate of material up greatly, and the most important point is that it will raise the production efficiency, also has c