中板辊道设计.doc

目录 摘要------------------------------------------------------------------------Ⅰ 第一章 辊道基本类型与结构 1 1.1、辊道类型---------------------------------------------------------------------4 1.2、中板的概念-------------------------------------------------------------------8 1.3、辊道的结构---------------------------------------------------------------------------------------9 第二章 辊道参数--------------------------------------------------------------------------------11 2.1、辊子直径-------------------------------------------------------------------11 2.2、辊身长度--------------------------------------------------------------------11 2.3、辊距-------------------------------------------------------------------------12 2.4、辊道速度-------------------------------------------------------------------12 2.5、辊道架子--------------------------------------------------------------------12 2.6、辊道的润滑和冷却-------------------------------------------------------------------------13 第三章 辊道的总体设计 15 3.1、电动机的选择 15 3.2、减速机的选择--------------------------------------------------------------15 3.3、联轴器的选择 20 3.4、键的选择 23 3.5．辊轮的设计 23 3.6．轴承的选择和校核 27 3.7．底座的设计 32 第四章 辊道的安装与维护 36 4.1．辊道的安装 36 4.2．辊道的维护 36 总结 37 5.1．毕业设计的意义 37 5.2．本次毕业设计的价值 39 参考文献 40 致 谢 41  中板生产线的辊道设计 摘要 辊道是轧钢车间运送轧件的主要设备，其重量占整个轧钢车间设备总重量的40%左右，是轧钢车间中使用最多的设备。轧件进出加，在轧机上往复轧制及轧后输送到精整工序等工作均由辊道来完成。Abstract roller is rolling workshop shipping rolled piece of main equipment, its weight of the rolling workshop equipment around 40% of the total weight of steel rolling workshop, is used in most of the equipment. It is transmitted by turning the rolled-piece rolls a transportation equipment. In heating furnace, rolled pieces in rolling mill in reciprocating rolling and rolling conveyed to the finishing procedures, after work 。This paper first introduces the basic roller type and structure, and to channel of parameters that were, and then based on the calculation speed reducer, electromotor, choose the coupling, a key, bearing, the roller design calculation, intens