基于单片机的电子定闹器的设计与实现方案论证-毕业设计说明书(论文)文献.docVIP

论文分类号： TP 学校代码： 13681 毕业设计说明书(论文) 题目：基于单片机的电子定闹器的设计与实现——方案论证 学生姓名： 学 号： 系 部： 专业班级： 指导教师： 二〇一五年四月 Based on Single-chip Microcomputer Electronic Alarm Device Design And Implementation Abstract With the progress of time, the development of the electronics industry, the application set alarm devices are increasingly being used. However, the traditional set alarm devices are using the spring-driven, motors and other mechanical drive type set alarm device. The traditional set alarm contact in frequent contact and off, greatly reducing its service life, is not conducive to further fully automated. Electronic set alarm is given relatively mechanical trouble is, the small size, light weight, low cost, high precision, long life, and safe, reliable, easy to adjust, suitable for frequent use. This paper presents a AT89C51 for the core, compact full-featured multi-purpose electronic set alarm, timing time with eight digital display, can be arbitrarily set by a small button in time range, the maximum timing 24 hours, after the system is powered Automatic digital tube display the current time, the time can be adjusted via the keyboard, respectively, minutes, seconds and subtraction, set the initial value to start the countdown timer, set alarm display when the predetermined time, the controller will automatically activate the alarm system, alarm sound through the buzzer, the entire operation is simple and convenient. Uses the very broad set alarm, it can be used as a timer, electrical controls are timed to achieve timing on or off timing. The structure of the article was introduced. Key words: AT89C51, Set alarm device, Digital display, Alarm System 基于单片机的电子定闹器的设计与实现——方案论证 摘 要 随着时代的进步，电子行业的发展，定闹器的应用也越来越广泛。但传统的定闹器都是使用发条驱动式、电机传动式等机械定闹器。传统的定闹器触头频繁接触和断开，大大的缩减了它的使用寿命，也不利于进一步全自动化。电子定闹器相对机械定闹器来说，体积小、重量轻、造价低、精度高、寿命长、而且安全可靠、调整方便、适于频繁使用。本文介绍了一种以AT89C51为核