土木工程毕业设计（论文）-沈阳市某办公楼设计精选.docxVIP

成人高等教育毕业设计说明书（论文）（沈阳市某办公楼设计） 学生姓名： 学习站点： 辽阳站 教育形式： 函授本科 层 次： 专升本 专 业： 土木工程 入学时间： 2014年 指导教师： 丁 职 称： 教授 二O一六年四月摘 要本工程是根据生产实践进行设计，本次设计包括建筑设计、结构设计、施工组织设计三部分的内容。该工程名称为沈阳市某集团办公楼，建筑总面积5500 ㎡，该建筑物共6层，高21.6m，设停车场，建筑造型为凹形。此建筑采用框架结构，采用柱下独立基础，由于建筑结构外形变化，所以建筑外形变化处设置变形缝，变形缝宽度为90mm。本建筑在设计时主要考虑水平方向的地震作用，并注意层间位移。本建筑的建筑部分主要完成了建筑的平面、立面、剖面设计。结构设计部分主要完成了结构方案确定的一榀框架和梁、柱的内力计算、配筋计算，绘制了基础平面布置图及基础详图、标准层结构布置图及板配筋图、一榀典型框架的配筋图、主要楼梯的配筋图。施工组织设计是对此建筑各个方面的特点进行细致深入分析后制订的。该建筑安全等级为二级，设防烈度为7度，应用PKPM软件，计算整体框架的内力值及配筋。 关键词: 框架结构;建筑设计; 结构设计;施工组织设计。 Pick toThis project is to design according to production practice, the design includes architectural design, structural design, the content of the construction organization design three parts.The project name for a group office building in shenyang, a total construction area of 5500 ㎡, the building, a total of 6, 21.6 m high, a parking lot, and construction for the concave shape.The building with frame structure, the use of independent foundation under column, due to the structure shape change, so the architectural appearance change setting deformation joint, the deformation crack width is 90 mm. This building main consideration in the design of horizontal seismic action, and pay attention to the displacement between the layers. The construction part of the building mainly completed building plane, elevation, section design. Structure design part mainly completes the structure scheme and cross beams and columns to a certainty of the internal force calculation, reinforcement calculation, draw the floor plan and detail of foundations, standard layer structure arrangement and plate reinforcement figure, one common reinforcement figure of typical framework, main reinforcement figure of the stairs.Construction organization design is building all aspects after the detailed analysis of the characteristics of formulation. The building security level for the secondary, fortification intensity of 7 degrees, using PKPM software, the overall framework of internal force