毕业设计（论文）-基于WINCC的PLC测量工件毕业设计精选.docxVIP

摘 要本文以枪管长度的检测为例，简单的介绍了关于博途 PLC1200与WinCC (TIA portal)的通讯系统设计以及检测系统的编程。该系统通过TCP （Transmission Control Protocol 传输控制协议）协议进行通讯，实现了上位机对下位机的可编程物理存储区的访问。用户们可以通过人机界面读取到编程控制器的各种数据，通过WinCC (TIA portal)还可以将数据进行整理，生成趋势图、表格等。这样不仅可以对枪管的实时长度有准确的掌握，还可以对生产线的生产趋势有进一步的了解。该系统使检测线更加信息化，工人们能时刻掌握产品的准确信息，并作出判断。通过该系统的实时监控，以及准确的数字采集，并附有人性化的人际交流界面，使得检测线的生产质量及效率都有了大大的提高。关键词：WinCC；可编程控制器；TCP通讯协议AbstractThis paper, which is based on detection about the length of the barrel as an example, was a brief introduction about the TIA portal PLC1200 programming and WinCC (TIA portal) communications system design and detection systems.The system through TCP (Transmission Control Protocol) to communicate, and had achieved the PC access to the programmable physical storage area of lower machine. Users can read a variety of data of the programmable controllerthrough the man-machine interface. By the WinCC (TIA portal), they can also organize the data to generate trend graphs, tables and so on. Not only had it an accurate grasp about the real-time length of the barrel, but also had a better understanding about the production trends of production line. The system made the detection line more information, and workers can always have accurate information about the production, then to make a judgment. Through the real-time monitoring of the system, the accurate data acquisition, as well as the humane of interpersonal communication interface, the system made the production quality and efficiency of the inspection line have been greatly improved.Key words: WinCC; PLC; TCP protocol目 录1 绪论11.1 概述11.2 枪管长度检测系统的发展11.2.1 枪管长度检测系统的历史11.2.2 枪管长度检测系统现状和发展趋势21.3 本课题研究的主要内容和意义21.3.1 本课题研究的主要内容21.3.2 本课题研究的主要意义22 枪管长度检测系统结构与总体设计32.1 枪管长度检测系统基本原理32.1.1 枪管长度检测系统的基本原理32.1.2 枪管长度检测系统的流程32.2 枪管长度检测系统的层次分析42.3 硬件构架设计42.4 软件构架设计42.5 WinCC与中层PLC的通讯方式52.6 小结53 枪管长度检测系统整体技术63.1 枪管长度检测系统的下位机介绍63.1.1 S7-1200 PLC发展简单介绍63.1.2 S7-1200 PLC CPU的介绍63.1.3 S7-1200 PLC其它组件简单介绍73.1.4 S7-1200 PLC功能块93.1.5 S7-1200 PLC变量103.2 编写枪管长