摘要工艺学是研究机械加工工艺技术和夹具设计为主的技术学科.docVIP

摘 要 工艺学是研究机械加工工艺技术和夹具设计为主的技术学科,具有很强的实践性,要求学习过程中应紧密联系生产实践,同时它又具有很强的综合性。 本次毕业设计研究的课题是轴承座零件加工工艺编制及夹具设计，主要内容如下： 首先，对零件进行分析，主要是零件作用、结构和工艺的分析，通过零件分析可以了解零件的基本情况，而工艺分析可以知道零件的加工表面和加工要求。根据零件图提出的 具体加工要求，确定毛坯的制造形式和尺寸。第二步，进行基面的选择，确定加工过程中的粗基准和精基准。根据选好的基准，制定工艺路线方案，通常情况下制定两种以上的工艺路线方案，通过工艺方案的比较分析，再确定出可以使零件的几何形状、尺寸精度及位置精度等技术要求得到合理保证的工艺路线方案。第三步，根据已经确定的工艺路线，选择加工设备及工艺装备，再确定每一工步的切削用量。第四步，设计钻轴承座 Φ 9mm 关键词：轴承座，加工工艺，夹具设计 ABSTRACT The technology is based machining technology and fixture design disciplines, highly practical requirements of the learning process should be closely linked to production practices, but it also has a strong. Graduate design research topics bearing parts machining process planning and fixture design, the following major elements: First, the parts, the main part the role, structure and process analysis through the parts analysis to understand the basic situation of the parts, process analysis to know the parts of the machined surface and machining requirements. Specific processing requirements according to the parts diagram to determine the form and size of blank manufacturing. The second step, the choice of the basal plane, determine the processing of crude benchmarks and refined benchmark. To develop a process route program according to the selected benchmark, usually develop two or more of the process line program, through the comparative analysis of the technology program, and then determine the geometry, dimensional accuracy and positional accuracy of the technical requirements can make the parts get a reasonable to ensure that the process route program. The third step, according to the process routes have been identified, select the processing equipment and process equipment, and then determine the cutting parameters of each process step. The fourth step is the design of drilling the bearing of Φ 9mm hole jig. Proposed fixture design task, select locating datum and then determine the fixture structure program, and then start cutting force, the clamping forc