矿泉水瓶盖注塑模具改进设计毕业设计精选.docVIP

基于PRO/E矿泉水瓶盖注塑模具改进设计 [摘要] 此次设计是对矿泉水瓶盖注塑模的设计，包括对它的工艺分析，材料性能，设备选择，尺寸计算等内容。由于此塑件内部有螺纹，所以主要解决了塑件脱模方式的选择，脱模机构的设计，型腔的设计，以及模腔数目的确定等问题。经过对比采用螺牙旋转出模具，已达到预期目的。 [关键词]：注塑模，脱模机构，螺纹 Improvement Based on PRO/E mineral water bottle injection Molds Abstract : The design is a mineral water bottle injection mold design, including its process analysis, material properties, equipment selection, sizing and so on. Because inside this plastic parts are threaded, so the main choice to solve the plastic stripping methods, design releasing mechanism, cavity design, and mold cavity to determine the number of other issue