Reliability Evaluation of Distribution Architectures…配电结构的可靠性评估.pdfVIP

Reliability Evaluation of Distribution Architectures Considering Failure Modes and Correlated Events SAJEESH BABU Licentiate Thesis Stockholm, Sweden 2015 TRITA-EE 2015:82 KTH Elektroteknisk och konstruktion ISSN 1653-5146 Skolan f枚r elektro- och systemteknik ISBN 978-91-7595-719-7 SE-100 44 Stockholm, Sweden Akademisk avhandling som med tillst氓nd av Kungl. Tekniska h枚gskolan framl盲gges till offentlig granskning f枚r avl盲ggande av teknologie licentiatexamen i elektro- och systemteknik fredagen den 20 oktober 2015 klockan 13.00 i f枚rel盲sningssal Q21, Osquldasv盲g 6B, Kungl. Tekniska h枚gskolan, Stockholm. 漏 Sajeesh Babu, oktober 2015 Tryck: Universitetsservice US AB Abstract Power systems are in a phase of automation where intelligent components and sub-systems are employed to monitor, control and manage the grid. Quantifying the complex consequences on system reliability, from the integration of such automated and semi-automated equipment into the existing grid is important for maintenance optimisation and fault mitigation. This thesis identifies the advanced approaches in power system reliability analysis with the potential to capture the complications and correlations in modern power grid after reviewing the traditional reliability evaluation methods. A method for modelling the different modes of failures, possible in a substation and feeder architecture along with the probable false tripping scenarios was developed. An improved Reliability Block Diagram based approach was designed to count in the traditionally unaccounted failure cases affecting both the primary grid a