带凸缘圆筒形件端盖冲压成形工艺与模具设计【落料拉深复合模】.docVIP

带凸缘圆筒形件端盖冲压成形工艺与模具设计【落料拉深复合模】 摘要：本设计题目为端盖冲压成形工艺与模具设计，体现了板类冲压零件的设计要求、内容及方向，有一定的设计意义。通过对该零件模具的设计，进一步加强了设计者冲压模具设计的基础知识，为设计更复杂的冲压模具做好了铺垫并吸取了更深刻的经验。 本设计运用冲压成型工艺及模具设计的基础知识，首先分析了工件的成形工艺及模具成形结构对制件质量的影响。介绍了端盖冲压模具设计时要注意的要点，通过对制件进行工艺分析，可确定制件的成形加工用一套复合模即可。从控制制件尺寸精度出发，对端盖冲压模具的各主要尺寸进行了理论计算，以确定各工作零件的尺寸，从模具设计到零部件的加工工艺以及装配工艺等进行详细的阐述，并应用CAD进行各重要零件的设计。 关键词：复合模；工艺分析；模具零部件的加工工艺。 the shell cover stamps forminghandicraft and design for die Abstract：The topic of this design is the shell cover stamps forming handicraft and design for die.The requirement，content and direction of the design of the stamps forming plate parts are embodied on this stamping die design. The designer’s foundation knowledge of the stamping die design is reinforced and is able to design more complex stamping die through the design. This design the elementary knowledge which designs using the stamping formation craft and the die, first has analyzed the work piece formed craft and the die forming structure to the workpiece quality influence. Introduced the shell cover filling piece stamping die design when must pay attention to the main point, through carries on the craft analysis to the workpiece, may determine the workpiece the formed processing uses set of superposable dies. Embarks from the control workpiece size precision, counter shell cover filling piece stamping die each main dimension has carried on the theoretical calculation, by determined each work components the size, designs from the die to the spare part processing craft as well as the assembly craft and so on carries on the detailed elaboration, and carries on each important components using CAD the design. Key words: compound die；process analysis；processing of die parts. 目 录 1 绪 论 1 1.1 国内模具的现状和发展趋势 1 1.1.1国内模具的现状 1 1.1.2国内模具的发展趋势 2 1.2　国外模具的现状和发展趋势 3 1.3带凸缘圆筒拉深模具设计的设计思路 4 2 端盖冲压工艺的分析 5 2.1 拉深件工艺分析 5 2.2 冲压工艺方案分析 5 2.2.1 冲压工艺方案的确定 5 2. 工艺