土木工程毕业设计计算书基础楼梯梁板柱配筋详细.doc

本科毕业设计（论文） 题目：康彩工贸公司办公楼设计 （B方案） 院 系： 建筑工程学院 专 业： 土木工程 班 级： 学 号： 指导教师： 2012年 月 摘 要 本工程为康彩工贸公司办公楼，建筑面积约4000平方米，主体房屋建筑高度为15.6米，长62.4米，宽15.6米。该工程为多层钢筋混凝土框架结构，抗震设防烈度为8度，抗震等级二级。 本次毕业设计结构设计。首先计算了该建筑的水平作用下的框架内力，主要包括重力代表值计算，梁柱的抗侧移刚度计算，自振周期计算。其次，进行竖向荷载框架内力的计算，主要包括恒载、活载作用下框架的弯矩、剪力、轴力计算，并对相应的数据进行了调幅再次，进行框架的内力组合，“强柱弱梁”原则配筋计算。最后，还进行了楼梯和的设计，以及基础截面的设计和配筋。 This design for the Xian Kang Cai Industrial and Trading Company office Building Abstract This design for the Xian Kang Cai Industrial and Trading Company office Building. The area is about 4000㎡, The height of the main boay is 15.6meters and its length and width are 62.40 meters and15.60 meters. The project is the reinforced concrete frame structure, seismic fortification intensity is 8 degrees, seismic grade two. The graduation design for the main structure design and calculation. The first calculation of the building under horizontal earthquake action of internal force of frame, including the value compute of the gravity representative data, the calculation as to risist sidesway stiffness of the beam and column and the flap period calculation，horizontal earthquake action and its moment、shear force、axially force. The next in order, we calculate the vertical loaded the dint inside the frame,including the frame moment、shear force、axially force under the dead load and live load, and modify the relevant moment about the beams ends, The third, the frame beam goes together with the frame column are calculated, according to the principle of strong column and weak beam，strong shear force and weak moment, strong node and weak component . Finally, we still calculate the stairs together with floor slab, and the design of the footings and its reinforcement. Key Words:? frame-structure; architectural design;structural design; Seismic design; 目录 摘要 Ⅰ Abstract Ⅱ 主要符号表 Ⅶ 前言 Ⅷ 1 建筑设计说明书 1 1.1建筑设计概况与主要技术经济指标 1 1.1.1 详细设计说明 1 1.1.2 建筑主要技术经济指标 1 1.2 建筑内容 1 1.2.1 平面功能分析 1 1.2.2 建筑体型选择与平面布置