建行流水单翻译件模板 英文.doc

Personal Current Account Details Print Teller No.: Print Time: Account No.: Account Name: Currency: RMB Cash Remittance Identification: Cash Start Date: Termination Date: Transaction Date Abstract Currency Cash Remittance Identification Transaction Amount Account Balance Reciprocal Account No. Reciprocal Account Name Operator No. Autobiographical Abstratct（自述摘要） 批量代付业务资金集中过渡户 Batch payment business fund centralized transfer account Interest Settlement（结息） Cash Withdraw（现金支取） Laocheng Sub-branch in Dangshan, China Construction Bank Corporation official stamp for business （盖章：中国建设银行***市***支行 日期 业务专用章） 北京夜场招聘 92MZt46ifRD5 stator. Rotor installed in the stator end upper hangers supports or in the end cap oil parts installed special rotor shaft bracket. (Figure 19) in the stator ring shop in turn lower half of the hard steel sheet, rubber mat and curve skateboards on the plate fixed to the four corners of four rope or nylon rope, tie outside the stator on the basis of, respectively. (Figure 20) axial-flow fan blade diameter greater than retaining ring diameter of the rotor at the top, in front of the wear the stator, best to blade removed, preventing scratches and blades should be well marked. Rotor steam-side back wheel below the shaft or parts installed steam-side arc slider and the slider lower sliding surfaces coated with a thin layer of grease. The rotor excitation traction installed end to end by a horizontal pole. Wire ropes lashing shall not damage the rotor surface using soft material wrapping wire rope, and the pad on the rotor surface with hard wood, or aluminum, lashing rope rotor with two points, the distance between two points is generally not less than 500~700mm, lashing wire rope when winding on the rotor and tighten the double baolan slide knot ... rotor wear loaded official hanging up