一基于应变的热采井套管设计方法.pdfVIP

2014年摇 第38卷摇 摇 摇 摇 摇 摇 中国石油大学学报(自然科学版)摇 摇 摇 摇 摇 摇 摇 摇 Vol.38摇 No.3 摇 第3期摇 摇 摇 摇 摇 摇 摇 摇 Journal of China University of Petroleum摇 摇 摇 摇 摇 摇 摇 摇 Jun.2014 摇 摇 文章编号:1673鄄5005(2014)03鄄0068鄄05摇 摇 摇 doi:10.3969/ j.issn.1673鄄5005.2014.03.011 一基于应变的热采井套管设计方法 韩来聚,贾江鸿, 闫振来 (中石化胜利石油工程有限公司钻井工艺研究院,山东东营257017) 摘要:提出基于应变的热采井套管设计方法,确定基于应变的设计准则,通过建立三维弹塑性有限元模型,模拟分析 热采井多轮次生产过程中应力和应变变化规律,并以胜利油田A井为例进行实例设计。 结果表明,该设计方法密切 结合热采井“注-焖-采冶生产过程,可考虑多轮次循环温度载荷对套管的损伤程度,通过计算多轮次生产条件下套管 上的累积塑性应变,依据热采井生产轮次要求及应变准则,科学灵活地设计套管,可以为热采井套管柱设计提供新 思路。 关键词:稠油油藏;热采井;塑性应变;套管设计;蒸汽吞吐 中图分类号:TE26摇 摇 摇 文献标志码:A A casing design method based on strain variations for wells in thermal recovery processes HAN Lai鄄ju,JIA Jiang鄄hong,YAN Zhen鄄lai (Drilling Technology Research Institute,ShengliPetroleum Engineering CorporationLimited,SINOPEC, Dongying 257017,China) Abstract:A newcasingdesignmethodbasedonstrainvariationswasproposedforwellssubjectedinintensivethermalrecov鄄 ery processes,such as steam recycling for heavy oil recovery,and the corresponding design criteria were introduced. The thermal stressandstraingeneratedonthecasingtubeinthewellborewereanalyzedandsimulatedduringmulti鄄roundproduc鄄 tion processes using a3D elastic鄄plasticfinite element method(FEM) model. A case study for casing design using the new methodwas conductedfor a typical well usedfor steam injection and oil production in Shengli Oilfield. The varying load on the casing tube and its damage mode can be considered based on the thermal stress and strain due to temperature variations during the steam injection,soaking and oil production processes. The results show that the plastic strain accumulated in the casing tubeduringmulti鄄roundsteamrecycl