关于asme证书申请程序推荐.docVIP

关于ASME证书申请程序 p][/p]ASME证书申请程序1.? ? The “Applicant”(Manufacturer) sends a telefax / letter to the ASME Accreditation Department to request “Application Forms”.申请者（制造商）与ASME 联系获得《ASME认证申请表》2．Signing of an inspection Service Agreement between the ALA (Authorized Inspection ? Agency) and the “Applicant”.? 申请者与ASME 授权的审查机构签定《审查服务协议》。3．Completion of the “Applicant Forms” indicating the type of certification and stamps ? applied for and “AIA” selected and contracted.? 填写《认证申请表》，应注明所要申请的证书和钢印类型，以及申请者签约的ASME? 授权的审查机构。4．The completed “Application Forms” are returned to ASME’s Accreditation department? One engineer of the “Applicant” should apply for ASME membership (optional).? 将填好的《认证申请表》寄回ASME认证签定部门，申请方能有一名技术人员申请ASME会员（自愿）。5．Procurement of? ASME Code Books as required per type of certification applied for.? 按照要求购买所申请ASME证书的相应技术手册。6．ASME notifies the AIA contracted to confirm to ASME that an inspection Service? Agreement has been signed with the “Applicant”.? ASME要求申请者联系的授权审查机构,应确认其已经与申请者签定《审查服务协议》。7．The AIA and the “Applicant” establish a Time Schedule for all action be taken to prepare? the joint Review.? ASME授权的审查机构与申请者制订时间表，其中包括所有针对联合审查的准备程序。8．Scheduling of the Joint Review date with ASME.? ASME授权的审查机构与申请者制定时间表，其中包括所有针对联合审查的准备程序。9．Preparation of the Joint Review? 联合审查的准备工作? ? preparation of the Quality? Manual准备《质量手册》? ? preparation of a representative component or? component part as demonstrationItem准备审查时要展示或演示的代表性产品和零部件? ?? preparation of the Welding Procedure Specification(WPS)准备《焊接程序规范》? ?? qualification of the Procedure Qualification Record (PQR)《程序要求记录》的建立水平?? ? qualification of Welding Personnel (WPQ)焊接人员的资格? ? preparation of the? drawing and the design calculation准备设计图纸与产品计算公式? ? preparation of work? procedures (e.g. for the pressure test , heat treatment ,handling of welding filler material , nondestructive examination (NDE))准备工作流程（例如：压力检测，热处理，焊料的处理，非破坏性试验等）? ? demonstration? (qualification) of NDE procedures to AI (Aut