关于mega2560.docxVIP

Arduino Mega 2560Arduino Mega 2560 R3 FrontArduino Mega2560 R3 BackArduino Mega 2560 FrontArduino Mega 2560 BackOverviewThe Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (/dyn/resources/prod_documents/doc2549.PDFdatasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.The Mega 2560 is an update to the http://arduino.cc/en/Main/ArduinoBoardMegaArduino Mega, which it replaces.Schematic, Reference Design Pin MappingEAGLE files: http://arduino.cc/en/uploads/Main/arduino-mega2560-reference-design.ziparduino-mega2560-reference-design.zipSchematic: http://arduino.cc/en/uploads/Main/arduino-mega2560-schematic.pdfarduino-mega2560-schematic.pdfPin Mapping: http://arduino.cc/en/Hacking/PinMapping2560PinMap2560 pageSummaryMicrocontrollerATmega2560Operating Voltage5VInput Voltage (recommended)7-12VInput Voltage (limits)6-20VDigital I/O Pins54 (of which 14 provide PWM output)Analog Input Pins16DC Current per I/O Pin40 mADC Current for 3.3V Pin50 mAFlash Memory256 KB of which 8 KB used by bootloaderSRAM8 KBEEPROM4 KBClock Speed16 MHzPowerThe Arduino Mega can be powered via the USB connection or with an external power supply. The power source is selected automatically.External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the boards power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector. The board can operate on an external supply of 6 to 20 volts. If supplied with