火电厂除尘装置电控电路设计与仿真分析参考.docVIP

编号： 　毕业设计(论文) 题 目：学　　院： 机电工程学院 专 业： 电气工程及其自动化 学生姓名： 学 号： 指导教师单位： 姓 名 职 称： 副教授 题目类型：?理论研究 ?实验研究 ?工程设计 ?工程技术研究 ?软件开发 摘 要 电除尘器作为消烟除尘的生产设备和保护大气环境的环保设备，在电力、建材、化工等行业得到广泛应用。本文针对火电厂电除尘器，利用Matlab和Proteus软件对除尘装置的电控电路进行设计与仿真分析。设计除尘控制系统，系统能够实现电路控制系统的运行仿真。电路控制系统包括高压控制部分和低压控制部分。高压控制部分分为升压、整流部分，整流出几万伏的直流电压加到除尘器本体的两极上进而实现将气体电离、粉尘荷电等除尘工作。本系统设计多种保护措施，能够使高压运行中提供安全保障。低压控制部分主要由阳极、阴极振打系统，灰斗卸灰、瓷套加热控制系统组成。主要完成系统板极上收集的灰尘进行振打清灰，并由灰抖输送灰尘的过程。本文重点是通过是针对电除尘器的Matlab和Proteus软件仿真，模拟火电厂电除尘器电控电路部分的电路运行控制，从而掌握一定的电除尘控制技术。 关键词：电除尘器；Matlab；Proteus；系统设计；电路仿真 Abstract ESP, as a smoke and dust eliminating and environmental protection equipment to protect the air, is widely used in power, building materials, chemical industry. Specific to ESP power plant, this paper will design and have a simulation analysis to the electronic control circuit dust removal device by using Matlab and Proteus software. The system can run the simulation circuit control system through designing the dust control system. Circuit control system consists of high-voltage and low voltage control section. High voltage control section is divided into booster and rectifier parts. The entire outflow of tens of thousands of volts of direct current voltage is applied to the poles on the filter body so as to realize the gas ionization, dust and other dust charged work. This system designs a variety of protective measures so it can provide security in enabling high-voltage operation. The low voltage control part is mainly consisted of the anode and cathode vibration system, discharging hopper, and porcelain heating control system. This part completes the process of vibration cleaning the collected dust on the system board then transporting the dust by shaking it. This paper focuses on electrostatic precipitator through the Matlab and Proteus software for simulation and simu