基于分布参数模型的直流输电线路故障测距方法推荐.pdfVIP

第30 卷 第13 期 中 国 电 机 工 程 学 报 Vol.30 No.13 May 5, 2010 2010 年5 月5 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 75 0258-8013 (2010) 13-0075-06 TM 77 A 470 40 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 基于分布参数模型的直流输电线路故障测距方法 高淑萍，索南加乐，宋国兵，张健康，焦在滨 (西安交通大学电气工程学院，陕西省 西安市 710049) Fault Location Method for HVDC Transmission Lines on the Basis of the Distributed Parameter Model GAO Shu-ping, SUONAN Jia-le, SONG Guo-bing, ZHANG Jian-kang, JIAO Zai-bin (School of Electrical Engineering, Xi’an Jiaotong University, Xi’an 710049, Shaanxi Province, China) ABSTRACT: A novel fault location method using single 0 引言 terminal data is proposed. It’s different from those based on the 高压直流输电(high voltage direct current ， traveling wave theory. It can be applied to high voltage direct current (HVDC) transmission lines. Based on the distributed HVDC) 以其传输功率大、线路造价低、控制性能好 parameter model, the voltage and current distributions can be 等优点，在远距离、大功率输电中占有越来越重要 calculated using the voltage and current measured in the local 的地位，世界发达国家都把它作为大容量、远距离 terminal. According to the calculated distribution voltage and 送电和异步联网的主要手段；在中国，也因“西电 current over the line, transition resistor can be computed and 东送，南北互供，全国联网”，尤其是近年来国家 the fault can be located according to the principle that the 大力发展特高压，而使高压直流输电成为电力建设 variance of the calculated transition resistor is minimum at the 的热点。随着全国联网的完成，直流输电工程必将 fault point. The algorithm, which is performed in time domain, 发挥着越来越重要的作用