SVTP_ver 4.05 8.1-外观和耐久力需求.docx

REV 1.6 Reviewed/Updated: May 11, 2009 EXTERIOR ENCLOSURE COSMETIC AND DURABILITY REQUIREMENTS 外观件表面处理和耐久力需求 TEST SCOPE 测试范围 The following document describes the reliability, performance requirements and test methods for decorated surfaces used on notebook computer exterior surfaces such as: paint, In Mold Laminate (IML), In Mold Roll ink (IMR), metal clad covered plastic or metal enclosures, printed icons and other decorative surfaces. 以下文件描述了装饰面的可靠性，性能需求及测试方法，其主要用于笔记本外观面，例如：模具锻压，模具墨辊，塑料包裹的金属包层或金属附件，印刷图标和其他装饰面。 GENERAL TEST PROCEDURE 总体测试步骤 Tests described in this specification shall be performed on all individual piece parts (e.g. LCD enclosure, LCD bezel, base enclosure, top enclosures, rear housing, etc.) being decorated which can be tested anytime once the product is ready. The assembled product may also be tested as required. 所有装饰件都应严格按照规定进行测试（例如，LCD附件，刃角，底盖附件，上盖附件，后盖外壳等等），一旦准备好任何时候都可以进行测试。 COSMETIC AND PERFORMANCE TESTS 外观及性能测试  HYPERLINK \l OLE_LINK1 \s 1,1173,1193,0,,COSMETIC INSPECTION COSMETIC INSPECTION 外观检验  HYPERLINK \l _Hlk207525776 \s 1,3975,3995,0,,STAIN AND FADE TEST STAIN AND FADE TEST 褪色测试  HYPERLINK \l _Hlk207525812 \s 1,6048,6064,0,,PENCIL HARDNESS PENCIL HARDNESS 铅笔硬度测试  HYPERLINK \l _Hlk207526015 \s 1,7214,7238,0,,CROSS-CUT TAPE ADHESION CROSS-CUT TAPE ADHESION 附着力测试  HYPERLINK \l _Hlk207526063 \s 1,9068,9093,0,,ABRASION – TABER AND RCA ABRASION – TABER AND RCA 耐磨损  HYPERLINK \l _Hlk207526090 \s 1,12768,12783,0,,THICKNESS TEST THICKNESS TEST 厚度测试  HYPERLINK \l _Hlk207526117 \s 1,14715,14728,0,,BOILING TEST BOILING TEST 沸点测试  HYPERLINK \l _Hlk207525983 \s 1,15137,15181,0,,ENVIRONMENTAL – HIGH HUMIDITY TH ENVIRONMENTAL – HIGH HUMIDITY THERMAL SHOCK 环境—湿度大温度急增  HYPERLINK \l _Hlk207526156 \s 1,16523,16554,0,,HUMIDITY TEST – HIGH/LOW CYCLE HUMIDITY TEST – HIGH/LOW CYCLE 湿度测试—高/低循环  HYPERLINK \l _Hlk207526184 \s 1,18590,18617,0,,PRINTED ICON ABRASION TEST PRINTED ICON ABRASION TEST 印刷图标乃磨损测试  HYPERLINK