基于ENC28J60的以太网设计--梁概要.doc

济源职业技术学院 毕 业 设 计（论文） 题目 基于ENC28J60的以太网设计与实现 系别 信息工程系　 专业 计算机应用技术 班级 计应1001班 姓名 xx 学号 指导教师 xxx 日期 二零一二年九月 基于ENC28J60的以太网设计与实现 总计：毕业设计（论文）47页 图表 28副 摘 要 随着Internet迅猛发展，IP已经占据了各种终端应用的主导地位，而如何更高效、高速、廉价的传送IP数据是今后网络研究的重点。到目前，各种接入网技术之所以能够发展起来，更是适应了当今网络的发展，但是这些技术都存在着一个相同的问题：成本较高、性价比不高。而提到廉价，人们会很自然地想到以太网技术，但是能否接入网到这一网络环境中还需要认真研究。 ENC28J60是MicrochipTechnology(美国微芯科技公司) 于2005年推出的一款28引脚的独立以太网控制器，由于采用SPI串行接口方式，简化了设计本文介绍了其特性、内部结构引脚功能ENC28J60的硬件结构与接口电路，详细分析了其寄存器设置和工作过程ENC28J60；SPI接口；TCP/IP移植 ABSTRACT With the rapid development of Internet, IP have occupied various terminal application dominance, and how to more efficient, high-speed, low-cost transmission of IP data is the future of network research focus. At present, all kinds of access network technology s development, it is to adapt to todays network development, but these techniques have an identical problem: high cost, not cheap. While references to cheap, people will naturally think of Ethernet technology, but whether the access network to the network environment also need to seriously study. ENC28J60 is the MicrochipTechnology ( American microchip technology company ) in 2005 launched a 28 pin independent Ethernet controller, due to the use of SPI serial interface, simplifying the design. This paper introduces the characteristics, internal structure, pin function and ENC28J60 hardware structure and interface circuit, a detailed analysis of the register set and working process. ENC28J60 uses standard SPI serial interface, through the program, TCP/IP protocol application, only 4 lines can be connected with the single chip microcomputer, is advantageous in the small system Ethernet function. According to the design of protocols for transplantation, composed of a single chip microcomputer p