重邮单片机中断显示学号程序.docVIP

/** * 工程名称：中断显示学号 * 功能描述：利用中断，动态显示自己的学号 * 附加说明：学号 * 修改记录：无 */ /* 头文件包含 */ #include regx51.h /* 用户宏定义 */ #define uchar unsigned char #define uint unsigned int /* 全局变量定义 */ static uchar seg = 0, cnt = 0; uchar seg_tab[] = {0x3f, 0x06, 0x5b, 0x4f, 0x66, 0x6d, 0x7d, 0x07, 0x7f, 0x6f}; uchar stu_tab[] = {0,9,2,1,0,5,7,3}; /* 自定义函数声明 */ /* 主函数部分 */ int main(void) { /* 端口初始化 */ P0 = 0x00; P1 = 0x0c; /* 定时器初始化 */ TMOD = 0x01; TH0 = (65536 - 2000)/256; TL0 = (65536 - 2000)%256; ET0 = 1; EA = 1; TR0 = 1; while (1) {} } void display(void) interrupt 1 { //restore TH0 = (65536 - 2000)/256; TL0 = (65536 - 2000)%256; seg = stu_tab[cnt]; P0 = seg_tab[seg]; P1_0 = 1;P1_0 = 0; P0 = ~(0x80cnt); P1_1 = 1;P1_1 = 0; cnt++; if (cnt = 8) { cnt = 0; } }/** * 工程名称：倒数00-59 * 功能描述：数码管的后两位以1秒为时间间隔实现从59倒数到00 * 附加说明： * 修改记录： */ /* 头文件包含 */ #include regx51.h /* 用户宏定义 */ #define uchar unsigned char #define uint unsigned int /* 全局变量定义 */ static char digit = 9, ten = 5, nub = 0; uchar seg_tab[] = {0x3f, 0x06, 0x5b, 0x4f, 0x66, 0x6d, 0x7d, 0x07, 0x7f, 0x6f}; /* 自定义函数声明 */ void delay_ms(uint cnt); /* 主函数部分 */ int main(void) { /* 端口初始化 */ P0 = 0x00; P1 = 0x0c; /* 定时器初始化 */ TMOD = 0x11; TH1 = (65536 - 50000)/256; TL1 = (65536 - 50000)%256; ET1 = 1; EA = 1; TR1 = 1; while (1) { P0 = 0xfe; P1_1 = 1;P1_1 = 0; P0 = seg_tab[digit]; P1_0 = 1;P1_0 = 0; delay_ms(2); P0 = 0xfd; P1_1 = 1;P1_1 = 0; P0 = seg_tab[ten]; P1_0 = 1;P1_0 = 0; delay_ms(2); } } void timer1_server(void) interrupt 3 { TH1 = (65536 - 50000)/256; TL1 = (65536 - 50000)%256; nub++; if (nub 20) { nub = 0; digit--; if (digit 0) { digit = 9; ten--; if (ten 0) { ten = 5; } } } } void delay_ms(uint cnt) { uint counter = 0; TMOD = 0x11; TH0 = (65536 - 1000)/256; TL0 = (65536 - 1000)%256; TR0 = 1; while (counter != cnt) { if (TF0 == 1) { TF0 = 0; TH0 = (65536 - 1000)/256; TL0