critical heat flux and mass loss rate for extinction of flaming combustion of timber：（临界热通量和质量损失率灭绝的木材燃烧的燃烧）.pdfVIP

Fire Safety Journal xxx (xxxx) xxx–xxx Contents lists available at ScienceDirect Fire Safety Journal journal homepage: /locate/fi resaf Critical heat flux and mass loss rate for extinction of flaming combustion of timber ⁎ Richard Emberley , Tam Do, Jessica Yim, José L. Torero School of Civil Engineering, The University of Queensland, St. Lucia, QLD 4072, Australia A R T I C L E I N F O A B S T R A C T Keywords: The critical mass loss rate and critical heat flux for self-extinction of flaming combustion during steady-state Heat transfer burning of timber was measured in this study for a range of timber species. A vertical mass loss calorimeter was Self-extinction used to provide the external heat flux and to measure the mass loss of the timber samples. The results showed Timber that the critical mass loss rate was dependent upon the timber species but did not show a clear dependency with External heat flux the timber density. Critical mass loss rates and heat fluxes for self-extinction exist for each of the timber species Cross laminated timber Critical mass loss rate tested for both the solid timber and cross laminated timber (CLT). Debonding of both the char layer and the individual lamella of the CLT caused increased mass loss rates, re-ignition after self-extinction and increased