基于PLC的热电厂燃料传输系统设计毕业设计文章.doc

 毕 业 设 计 论文题目： 学 生： 指导教师： 专 业： 班 级： 基于PLC的热电厂燃料传输系统设计 摘 要 由于热电厂燃料传输系统运行条件恶劣，各类干扰信号较多，使得抗干扰问题成为燃料传输程控实际运行及调试中的一大难题，直接关系到整个燃料传输系统的安全运行。热电厂的燃料传输程控系统改造为背景，详细分析和设计了一套PLC控制主要是燃料传输系统的自动控制和手动控制部分，皮带机和各设备的联机控制由联机控制面板操作，提高系统可靠性的方法，提出了一些具体措施，从硬件和软件两个方面着手，研究了信号抗干扰方法和实施手段，并在软件中模拟热电厂程控改造应用，工程实践表明：该系统运行可靠，抗干扰能力强，自动化程度高，为实现设备的状态检修奠定了必要的物质基础。 　 关键字：热电厂；PLC；传输系统 The design of thermal power plant fuel transmission system based on PLC Abstract Due to thermal power plant fuel transmission system operating conditions, all kinds of jamming signal is more, make the anti-jamming problems become the fuel transfer program is a big problem in actual operation and debugging, is directly related to the safe operation of the fuel transfer system.Thermal power plant fuel transfer SPC system reform as the background, a detailed analysis and design a set of PLC control is mainly fuel transmission system, automatic control and manual control part of the belt conveyor and online control by the online control panel of each equipment operation, the method to improve the reliability of the system, puts forward some specific measures, from two aspects of hardware and software, studies the signal anti-jamming methods and means of implementation, and simulation of thermal power plant in the software program application, engineering practice shows that the system reliable operation, strong anti-interference ability, high degree of automation, in order to achieve the state overhaul of equipment laid a necessary material foundation.????? Key words: thermal power plant;PLC;Transmission system目 录 摘 要 II Abstract III 1 绪论 1