西门子PLC设备远程诊断那些事儿 .docVIP

西门子PLC设备远程诊断那些事儿 这是我的一次跨国远程技术服务中回复的邮件...... gt;Hi Cen, gt; gt;after adjustment belt tension on the capstan, the take up works properly. gt;Thank you very much for your help. gt; Regards! Kaz nbsp; ----- Original Message ----- From: “Zane Huang” To: “KM-ELECTRO Morski Kazimierz” Sent: Monday, February 17, 2014 3:39 PM Subject: Re: Take up 5/4 nbsp; gt; Hi Kaz gt; gt; Long time haven’t seen each other, miss you much. gt; About the problem, I checked the historical data recorded in the system just now, gt;and found some difference between take up #3 and take up #4. gt; Pls see the attach files, screenshot pictures. gt; It seems that the problem started from afternoon Feb. 10th. gt; The take up system has auto-change function according to actual winding diameter of the reel. gt; d = Vset/(Pi*RPMact) gt; According to the recorded curves, the spool rotation speed must be much lower than it should gt; be normally. gt; Maybe this can help you solve the problem. gt; Any further information, pls send it to me. gt; Good luck ！ gt; Huang Cen nbsp; -----Original Message----- From: KM-ELECTRO Morski Kazimierz Sent: Monday, February 17, 2014 7:16 PM To: Zane Huang Subject: Take up 5/4 nbsp; gt; Hi Cen, gt; gt; Happy New Year!!! gt; Have problems with take up 5/4. gt; Random time 5-15 minutes to automatic spool change ( visible on LCD), take up change spool , gt; both on the left and right side...any ideas why? gt; TeamViewer id: ********* gt; password: ********** gt; Best regards! Kaz nbsp; 2014年的春节长假刚过的一个周一，刚上班没两天，一切似乎还沉浸在假期的气氛里，少有的清闲。快下班前突然接到一个配套客户主管工程师的电话，说在12年出口波兰的一套由我设计的设备出问题无法生产了，当地的工程师忙活了一礼拜没搞定，让我准备一下马上去波兰。气氛一下有点小紧张，什么情况？设备的确是我设计的，也是我亲自去波兰调试的，那边的设备主管Kaz也是个经验丰富的老工程师，他协助我调试，临走前我把家底儿都交代给他了，所以设备验收都快两年了据说一直不停地在生产，从来没找过我。怎么一下子就搞不定了呢？出啥大事儿啦？挂断电话疑惑了几分钟，紧接着Kaz的邮件也到了，他描述了下故障的现象，并告诉我远程登录设备的账号密码，当年在调试的时候